Welcome to Warmboard, Inc

Radiant heating floor panels


Roth Panel program for Radiant warmingOverview

The Roth Panel program enables installing radiant home heating in a current household along with new construction. It is lightweight, easily put in over solid subfloor or concrete and it is just 3/4" thick for the 3/8" tubing or 1" dense when it comes to 1/2" tubing.


Characteristics

The Roth Radiant Floor Panel program is a quickly put together PEX tubing track system that enables quick installation of hydronic radiant flooring heating over a preexisting subfloor. The system is designed around a 90 psi (6.3 kg/ cm2) high-density polystyrene foam area panel with a bonded 24 ga. aluminum sheet on the top. The foam provides thermal insulation underneath the panel while the aluminum provides also heat circulation concentrated right during the finished floor product. The reduced profile with this item permits effortless retrofit additionally the light-weight makes it easy to utilize in brand new building. The 2' x 4' (61 cm x 122 cm) field panels make installation faster than many other offered services and products. The area panels have tracks that enable the tubing to-be snapped in (no glue is needed) on either 6" (15.25 cm) or 12" (30.5 cm) centers. Radius panels for return bends and double pipe transition panels, to route tubing to your heated location, are included with every box for the Floor Panel program. Additional radius panels can be found separately, if needed. A floor Panel program for 3/8" PEX tubing is 3/4" (1.9 cm) dense and offers an approximate downward insulation worth of R=3.7. The Floor Panel System for 1/2" PEX tubing is 1" (2.5 cm) and provides an approximate downward insulation worth of R=4.5. The full-face aluminum sheet on area panel provides heating qualities comparable to a lightweight tangible overpour, but at lower fluid conditions in accordance with quicker pick-up times


Requirements

Radiant Panel System plans are offered for 3/8" and 1/2" tubing. Each box comes with these components and certainly will cover 96 sq.ft.:

  • 10 2' x 4' Master Panels
  • 6 Radius Panels
  • 12 Change Panels

Add-ons

Roth has all fixtures and resources readily available that expert installer needs to get the job done.

Heat Transfer Panels-Single Groove

-for installing of radiant heating below the floor

Heat Transfer Panels-Double Groove

Thermo Fin Panels

-two sizes offered (for 1/2" and 3/8" tubing)

-manufactured with 25percent more material than other transfer plates shopping making it possible for lower liquid temperatures therefore greater system efficiencies

-no pre-driller therefore higher installation freedom

Hole Punch Kit



Share this article





Related Posts


Retrofit Radiant floor heating
Retrofit Radiant floor heating
Radiant heating under carpet
Radiant heating under carpet

Latest Posts
Shawnee Heating and Cooling
Shawnee Heating…
About Waynesville, OH…
Goshen Plumbing and Heating
Goshen Plumbing…
From furnace repair works…
Plumbing, Heating and Air Conditioning
Plumbing, Heating…
My name is Kris Knochelmann*…
Refrigeration and Air Conditioning Magazine
Refrigeration…
May, 1929. The united…
Vehicles Air Conditioning Service
Vehicles Air…
The air conditioner in…
Search
Featured posts
  • Retrofit Radiant floor heating
  • Radiant heating under carpet
  • American Standard Heating & Air Conditioning
  • Seattle Heating and Air Conditioning
  • Sparks Heating and Air Conditioning
  • Washington Heating And Air Conditioning
  • York Heating and Air Conditioning
  • Electric Radiant floor heat
  • Heated Garage floor
Copyright © 2020 l ihousdekor.com. All rights reserved.