Homepage static image

Charging Auto air conditioning system


2. Find the low-side service port.

This interface is usually found on the line linking the accumulator and compressor. The large side fitting is found between your compressor and condenser. Seek advice from the service manual to confirm the exact location of the low-side service interface.

*Most 1994 and older cars used R12 because the original refrigerant, if car becoming maintained remains making use of R12, it should be evacuated and retrofitted. Blending R12 and just about every other refrigerant is unlawful. Never use the high-side interface to incorporate refrigerant, performing this is extremely dangerous and could trigger damage.

4. Attach the charging you hose pipe towards low-side service slot and make certain that you have a secure connection.

If the hose cannot attach effortlessly you might be utilising the incorrect interface.

8. Check out the service slot limit seal before reinstalling.

Make certain that the seal under the limit doesn't have any cracks, nicks, or rips. This seal could be included protection if the Schrader valve previously formed a leak.



Share this article





Related Posts


Auto Air Conditioning kits
Auto Air Conditioning kits

Latest Posts
Auto Air Conditioning kits
Auto Air Conditioning…
Our auto air cooling kits…
Radiant heating under carpet
Radiant heating…
If you are setting up…
Sears central air conditioning
Sears central…
Most people don’t really…
Save home Heat
Save home Heat
Our NATE licensed specialists…
Toyota Air Conditioning Repair
Toyota Air Conditioning…
The most fascinating aspect…
Search
Featured posts
  • Auto Air Conditioning kits
  • Air conditioning system design
  • Air conditioning system maintenance
  • Best home air conditioning system
  • Diagram of air conditioning system
  • Residential air conditioning systems
  • Two zone air conditioning system
  • Low cost air conditioning system
  • Pressure test air conditioning system
Copyright © 2020 l ihousdekor.com. All rights reserved.